What is a burner?
Atomizers are defined as any device that can vaporize liquid. Recently, it has become a term closely associated with vaping . It may sound confusing, but it is basically just a coil made of resistive wire that is heated to create vapor from e-liquid .
Atomizers, also known as vape coils, come in a variety of styles from disposable to custom-built coils. Atomizers – more specifically, coils – are measured in ohms based on their resistance. The lower the resistance, the higher the wattage required.
The word “atomizer” is used a lot with different definitions that can be confusing. It can refer to the coil or the device that holds it, such as a sub ohm tank or RDA commonly used in vaping.
Vape coils can be made from a variety of wire types, including kanthal, SS, nickel, and titanium. The atomizer requires a wick to saturate the vape coil with e-liquid. When you turn on the device, the coil heats up and turns the e-liquid into warm, aromatic vapor.
Some atomizers are also made from materials like ceramic. Other materials that can be used to wick vape coils include SS mesh, silica, or ekowool. Now let’s take a look at the two main types of atomizers so you can choose the one that’s right for you.
Pre-made burners and coils
Rolling your own coils isn’t difficult, but it’s not a requirement for a vaper. Many high-end devices still use pre-made coils. These atomizers, also known as coil heads, are specifically designed for a particular device and can last for about a week.
Each coil head has a different resistance rating and requires a certain amount of power. Sometimes some tanks have multiple coil heads with different resistance ratings, making ordering difficult.
For example, the Kanger Toptank has nearly a dozen coil heads just for its own use.
Some coils are designed for high wattage vaping, others for low wattage or TC mode. Different vape coils will have different effects on each vape session.
If you like to vape at low wattages, then you should use a high resistance coil. Low resistance coils require more wattage and can produce more vapor. Sub ohm coils have a resistance lower than 1.0 ohm.
Advantage:
- Convenient and easy to use
- Designed specifically for the device
Disadvantages:
- Add a part of the cost
- Unable to re-install the wick
- Only usable for one week
- Difficult to change taste
Rebuildable atomizers
Rebuildable atomizers require you to build your own coils to use. This isn’t easy and isn’t for the novice vaper. However, once you get the hang of it, the possibilities are endless. You can create a unique coil set to suit your vaping needs.
Rolling your own coils gives you the added advantage of being able to change the wicks whenever you want. You can also clean the coils and remove any lingering flavor from the old e-liquid so you’re ready to switch to a new flavor.
1. RDA
This type of device requires you to roll the coil yourself and inhale the vapor it produces directly by simply adding a small drop of e-liquid to the coil. This type of atomizer produces the strongest flavor of e-liquid and can sometimes produce very strong smoke. RDA is easy to build coil, you can roll coil for your RDA yourself after a few practice times.
2. RTA
Nowadays we have many types of rebuildable atomizers, and the most notable is the RTA . This type of atomizer is similar to the RDA in that you will have to roll the coil yourself to use it, it is more convenient than the RDA in that there is a tank below that continuously supplies the coil with essential oil to create flavor and create smoke.
Advantage:
- Can replace the wick
- Good taste
- Good smoke
- Customizable
Disadvantages:
- Requires skill and effort
- Time consuming
- May cause leakage and throat irritation if the wick is not installed properly.
Conclude
By now, you probably know what an atomizer is and have a basic understanding of how it works. You don’t have to be a professional coil builder to vape, and you can definitely find satisfaction with pre-made coils.
The term atomizer has been so overused that even professional vapers sometimes don’t know what it stands for. One thing is for sure, the atomizer is the vapor-producing device, whether it’s an RDA or RTA, and the vape coil is the part that gets heated inside.
They are both called burners, but now at least you know the difference.
